RF Shield Boxes for 2G, 3G, 4G and 5G performance enhancement |Ranatec

RF Shield Box

Ranatec offers RF Shield Boxes with good RF shielding performance covering all cellular (2G, 3G, 4G, and 5G), WiFi, and Bluetooth frequency bands. The RF Shield Boxes can be equipped with various interface configurations, digital and analog.

The Shield Boxes are 19″ rack-mountable with a convenient eject function and can be easily operated with one hand open-and-close using the front handle. All Ranatec RF boxes are optimized for maximum space efficiency, minimizing the non-usable space in height in the 19” rack. The difference between outer and inner dimensions in height is only 8 mm.

Ranatec offers a variety of shielded AC, LAN, USB, and HDMI Feedthru Filters with good filter suppression performance overall mobile frequency bands to use with RF Shield Boxes.

The Ranatec Shield Boxes can optionally be equipped with active ventilation and internal RF foam coating.

All RF boxes are designed, engineered, manufactured, and tested in Gothenburg, Sweden. All at one site, minimizing the risk for mistakes and maximizing quality.

Get a Quote
2U, 19″ rack
4U, 19″ rack
6U, 19″ rack
Customized

2U, 19″ rack mountable

Features

  • 60 dB shielding attenuation at 3 GHz
  • Freqency range 0.7-6 GHz
  • Different communication interfaces available
  • User can easily change interfaces at the rear
  • 19”, 2U rack mountable with eject function
  • One hand open-and-close using front handle
  • The lid stays open in any position

Specifications

  • Attenuation at 3 GHz >60 dB
  • Freqency range 0.7-6 GHz
  • Material Stainless steel/Al
  • Inner dimensions 400 x 300 x 85 mm
  • Outer dimensions 490 x 490 x 88 mm
  • Weight (standard config) 8.5 kg

Electrical Interfaces

All electrical interfaces are located on a replaceable interface plate at the rear of the RI 181. The interface plate can be equipped with the following:

  • LAN (Ethernet) 1 Gbps Feedthru Filter
  • Dual/Single USB 2.0 480 Mbps Feedthru Filter
  • (Form A, Rectangle, (f)/Form A, Rectangle, (f))
  • Single USB 3.1 Feedthru Filter
  • EMI Filtered DC Voltage Feedthru
  • SMA(f)/SMA(f) Bulkhead Connector

Application

The RI 181 is designed for high shielding over all cellular mobile frequency bands making it suitable for applications such as:

  • Cellular mobile phone test
  • Basestation transceiver test
  • Cellular network test
  • Wireless semiconductor test
  • WLAN/Bluetooth/ZigBee/WiMax device test

Overview

The Ranatec RI 181 is a high performance shield box for all types of applications where good shielding is neeed. It is especially suited for rack mounted test systems where the device under test is frequently replaced. RI 181 fits into a 19” rack, occupying only 2HU. With a one hand operation, the user can pull it out from the 19” rack and open the lid.

Ordering

  • RI 181 Shield box with standard interface plate
  • RI 4182 LAN 1 Gbps feedthru filter
  • RI 4184 Dual USB 2.0 feedthru filter
  • RI 4185 Single USB 2.0 feedthru filter
  • RI 4192 USB 3.0 Feedthru Filter
  • RI 4193 HDMI Feedthru Filter
  • RI 4194 LAN 10 Gbps Feedthru Filter
  • RI 181-11 Internal shielding wall
  • RI 181-12 Cover Plate for feedthru filter cut-outs
  • RI 181-13 DC Feedthru EMI Filter
  • RI 181-14 SMA(f)/SMA(f) Bulkhead Connector
  • Unused SMA/DC Voltage holes are covered by screws.
Get a Quote
Download Datasheet

4U, 19″ rack mountable

Features

  • 60 dB shielding attenuation at 3 GHz

  • Different communication interfaces available
  • User can easily change interfaces at the rear
  • 19”, 4U rack mountable with eject function
  • One hand open-and-close using front handle
  • The lid stays open in any position

Specifications

  • Attenuation at 3 GHz >60 dB

  • Material Stainless steel/Al
  • Inner dimensions 390 x 290 x 150 mm
  • Outer dimensions 490 x 490 x 177 mm
  • Weight (standard config) 12 kg

Electrical Interfaces

All electrical interfaces are located on a replaceable interface plate at the rear of the RI 187.

Standard configuration includes:

  • 4 pcs RI 4192 USB 3.0 Feedthru Filter (B-A)
  • 1 pc AC 110/230 V Feedthru Filter
  • 8 pcs SMA(f)/SMA(f) Bulkhead Connector
  • 120 VAC Outlet Power Strip (6 outlets) USA type, inside the box
  • RF absorption foam, inside the box

The interface plate can be equipped with the following:

  • 0-4 pcs LAN (Ethernet) 1 Gbps Feedthru Filter
  • 0-4 pcs Dual/Single USB 2.0 480 Mbps Feedthru Filter
  • (Form A, Rectangle, (f)/Form A, Rectangle, (f))
  • 0-4 pcs Single USB 3.0 Feedthru Filter
  • 0-4 HDMI Feedthru Filter
  • 0-1 pcs AC 110/230 V Feedthru Filter
  • 0-8 pcs SMA(f)/SMA(f) Bulkhead Connector

Application

The RI 187 is designed for high shielding over all cellular mobile frequency bands making it suitable for applications such as:

  • Cellular mobile phone test
  • Basestation transceiver test
  • Cellular network test
  • Wireless semiconductor test
  • WLAN/Bluetooth/ZigBee/WiMax device test

Ordering

  • RI 187 Shield Box
Get a Quote
Download Datasheet

6U, 19″ rack mountable

Features

  • 60 dB shielding attenuation at 3 GHz

  • Different communication interfaces available
  • User can easily change interfaces at the rear
  • 19”, 6U rack mountable with eject function
  • One hand open-and-close using front handle
  • The lid stays open in any position

Specifications

  • Attenuation at 3 GHz >60 dB

  • Material Stainless steel/Al
  • Inner dimensions 390 x 290 x 250 mm
  • Outer dimensions 490 x 490 x 266 mm
  • Weight (standard config) 13.2 kg

Electrical Interfaces

All electrical interfaces are located on a replaceable interface plate at the rear of the RI 188.

Standard configuration includes:

  • 1 pcs RI 4184 Dual USB 2.0 480 Mbps Feedthru Filter
  • 1 pcs RI 4182 LAN 1 Gbps Feedthru Filter
  • 1 pc AC 110/230 V Feedthru Filter
  • 6 pcs SMA(f)/SMA(f) Bulkhead Connector
  • 1 pc f-type 75 Ohm
  • Ventilation with fan

The interface plate can be equipped with the following:

  • 0-2 pcs LAN (Ethernet) 1 Gbps Feedthru Filter
  • 0-2 pcs Dual/Single USB 2.0 480 Mbps Feedthru Filter
  • (Form A, Rectangle, (f)/Form A, Rectangle, (f))
  • 0-2 pcs Single USB 3.0 Feedthru Filter
  • 0-2 pcs HDMI Feedthru Filter
  • 1 pcs AC 110/230 V Feedthru Filter
  • 0-6 pcs SMA(f)/SMA(f) Bulkhead Connector
  • 1 pc f-type 75 Ohm
  • Ventilation with fan

Application

The RI 188 is designed for high shielding over all cellular mobile frequency bands making it suitable for applications such as:

  • Cellular mobile phone test
  • Basestation transceiver test
  • Cellular network test
  • Wireless semiconductor test
  • WLAN/Bluetooth/ZigBee/WiMax device test

RF Shield Boxes for 2G, 3G, 4G and 5G performance enhancement | Ranatec

Ordering

  • RI 188 Shield Box
Get a Quote
Download Datasheet

Customized RF Shield Box

Ranatec is one of the leading RF shield box manufacturers on the market, offering fully customizable RF shield boxes you can design according to your needs and demands.

Customized RF Shield Box Price

Our custom RF Shield boxes are built on a scalable and flexible platform, both in regards to R&D and manufacturing, which enables fully custom solutions at a very competitive good price.

The RF shield box price of a custom build can vary greatly depending on several different factors including:

  • Shape and size of the box
  • Shielding attributes of the box
  • Construction material used for the box
  • Adjustments for power outlets (AC, DC)
  • Adjustments for ventilation features (vents, fans)
  • Adjustments for interface connectors (LAN, USB, TNC)

Fill the form below or contact us with custom requirements for RF Shield Box

Get a Quote

FAQs

RF test equipment refers to test equipment for test of products receiving or transmitting a RF signal. Typical products are Shielded rooms, RF boxes, Absorbers, Cables, Connectors, Filters, Attenuators, Amplifiers, Switches, Signal generators, Signal analyzer, Antennas and software.

Quality, Performance, and Usability are key aspects of the RF Test Equipment at Ranatec. All products at Ranatec are designed, engineered, and manufactured in Sweden.

Ask for a Quote