RF Shielded Enclosure by Ranatec for good filter suppression performance

Shielded Feedthru Filters

Ranatec offers a variety of shielded AC Power, LAN, USB 2.0, USB 3.0, and HDMI Feedthru Filters with good filter suppression perfomance over all mobile frequency bands.

The Feedthru Filters can be used for all types of applications where signals need to be feed through a shielded wall.

AC 110/230V
Feedthru Filter

Key Features

  • 110/230 VAC compatible
  • 70 dB filter suppression at 1-10 GHz
  • CE complient
  • Panel mountable

Specification

Connector input C14 male
Connector output C13 female
Material Aluminium
Dimensions 65x90x48
Weight 375 g
Operating voltage 110/230 VAC
Rated current 6 A
Compliance CE

Application

Primarily designed to fit in Ranatec’s RI 187 shield boxes, but can be used separately.

Overview

The Ranatec RI 4195 is a high performance feedthru filter for all types of applications where AC power need to be fed through a shielded wall. It has got good filter suppression performance over all mobile frequency bands.

Ranatec introduces new niche product portfolio of feedthru filter

Electrical Interfaces

The physical connectors are located at each end.

Mechanical Interfaces

RI 4195 is prepared for panel mounting with two threaded M4 screwholes. It is delivered with an EMC shielding gasket for simple and reliable mounting.

Ordering

  • RI 4195 110/230 VAC Feedthru Filter

LAN 10 Gbps Feedthru Filter

Key Features

  • LAN 10 Gbps compatible

  • 80 dB filter supression at 2.4, 5.8 and 7.125 GHz
  • Panel mountable

Specification

Connector Front RJ45 Jack
Connector Back RJ45 Jack
Material Aluminium
Dimensions 36x64x24 mm
Weight 90 g

Typical Filter Suppression

RI 4194 Typical filter suppression | Ranatec AB

Overview

The Ranatec RI 4194 is a high performance feedthru filter for all types of applications where LAN signals need to be fed through a shielded wall. It has got very good filter suppression performance over all mobile frequency bands.

Application

Primarily designed to fit in Ranatec’s RI 180 series shield boxes, but can be used separately.

Electrical Interfaces

The physical connectors are located at each end. The filter is reciprocal, which means the mounting direction can be either way.

Mechanical Interfaces

RI 4194 is prepared for panel mounting with two threaded M3 screwholes on the front. It is delivered with an EMC shielding gasket for simple and reliable mounting.

Ordering

  • RI 4194 LAN 10 Gbps Feedthru Filter

LAN 1 Gbps Feedthru Filter

Key Features

  • LAN 1 Gbps compatible

  • 75 dB filter suppression at 2.4, 5.8 and 7.125 GHz
  • Panel mountable

Specification

Power over Ethernet (max) 50 VDC, 380 mA
Connector Front RJ45 Jack
Connector Back RJ45 Jack
Material Aluminium
Dimensions 36x71x22 mm
Weight 90 g

Overview

The Ranatec RI 4182 is a high performance feedthru filter for all types of applications where LAN signals need to be fed through a shielded wall. It has got very good filter suppression performance over all mobile frequency bands.

Application

Primarily designed to fit in Ranatec’s RI 180 series shield boxes, but can be used separately.

Electrical Interfaces

The physical connectors are located at each end. The filter is reciprocal, which means the mounting direction can be either way.

Mechanical Interfaces

RI 4182 is prepared for panel mounting with two threaded M3 screwholes on the front. It is delivered with an EMC shielding gasket for simple and reliable mounting.

Ordering

  • RI 4182 LAN 1 Gbps Feedthru Filter

USB 2.0 480 Mbps Feedthru Filter

Key Features

  • USB 2.0 Hi-Speed 480 Mbps filters

  • Filtered USB device power feedthru, 900 mA
  • Panel mountable

Specification

USB Device Current Feedthru 900 mA Max
Connector Front USB Type A, rectangle (f)
Connector Back USB Type A, rectangle (f)
Material Aluminium
Dimensions 71 x 36 x 22 mm
Weight 90 g

Overview

The Ranatec RI 4184 and RI 4185 are high performance feedthru filters for all types of applications where USB signals need to be fed thru a shielded wall.

Application

The RI 4184 and RI 4185 are primarily designed to fit into Ranatec’s shield boxes, but can be used separately.

Electrical Interfaces

The physical connectors are located at each end of RI 4184 and RI 4185. The filters are reciprocal, which means the USB host can be attached to any of the connectors. RI 4184 can supply two USB devices with up to 900 mA each, and RI 4185 can supply one USB device with up to 900 mA.

Mechanical Interfaces

RI 4184 and RI 4185 is prepared for panel mounting with two threaded M3 screwholes on the front. It is delivered with an EMC shielding gasket for simple and reliable mounting.

Ordering

  • RI 4184 Dual USB 2.0 480 Mbps Feedthru Filter

  • RI 4185 Single USB 2.0 480 Mbps Feedthru Filter

USB 2.0 Mini Feedthru Filter

Key Features

  • USB 2.0 Hi-Speed 480 Mbps filter

  • Panel mountable

Specification

Connector Front USB Mini
Connector Back USB Type A, rectangle (f)
Material Aluminium

Overview

RI 4188 is a small and compact high performance feedthru filter.

Application

The RI 4188 can be used for applications where USB signals need to be fed through a shielded wall.

RI 4188 USB 2.0 Mini Feedthru Filter | Ranatec

Electrical Interfaces

The physical connectors are located at each end of RI 4188.

Mechanical Interfaces

RI 4188 is prepared for panel mounting with one threaded screwhole and a washer on the front. It is delivered with an EMC shielding gasket for simple and reliable mounting.

Ordering

  • RI 4188 USB 2.0 Mini Feedthru Filter

USB 3.0 Feedthru Filter

Key Features

  • 75 dB filter suppression at 2.4, 5.8 and 7.125 GHz
  • Filtered 2 A power feedthrough
  • Panel mountable

Specification

USB Device Current Feedthru 2 A Max
Connector Front Type A
Connector Back Type B
Material Aluminium
Dimensions 36x68x24 mm
Weight 90 g

Overview

The Ranatec RI 4192 is a high performance feedthru filter for all types of applications where USB signals need to be fed thru a shielding wall.

Application

Originally designed to fit into Ranatec’s RI 180 series shield boxes, but can also be used separately.

Electrical Interfaces

The physical connectors are located at each end of RI 4192. To accomodate the switchable power feedthru, the filter is non-reciprocal, which means that the USB host must be attached to the ”B” connector of the filter. RI 4192 can supply one USB device with up to 2 A.

Mechanical Interfaces

RI 4192 is prepared for panel mounting with two threaded M3 screwholes in the front. It is delivered with an EMC shielding gasket at both ”A” and ”B” connector, for simple, flexible and reliable mounting.

Ordering

  • RI 4192 USB 3.0 Feedthru Filter

USB 3.2 C Feedthru Filter

Key Features

  • 60 dB filter suppression at 2.4, 5.8 and 7.125 GHz
  • USB-C Connector
  • USB 3.2 Gen 2×2, 20 Gbps
  • Max 5 A, 20 V, 100 Watts
  • Panel mountable

Specification

Connector Front USB-C Jack
Connector Back USB-C Jack
Material Aluminium
Dimensions 36x62x24 mm
Weight 90 g

Overview

The RI 4199 is a high-performance USB 3.2 feedthru filter for all types of applications where USB-C signals need to be fed through a shielded wall.

Application

Originally designed to fit into Ranatec’s Shield Boxes, but can be used separately.

Electrical Interfaces

The physical connectors are located at each end. The filter is reciprocal, which means the mounting direction can be either way.

RI 4199 USB 3.2 C 20 Gbps Feedthru Filter | Ranatec AB

Mechanical Interfaces

The RI 4199 is prepared for panel mounting with two threaded M3 screw holes. It is delivered with an EMI/RFI shielding gasket for simple and reliable mounting.

Usage

To be used with RF shielded cables. USB-C cable must be mounted right-side up.

Ordering

  • RI 4199 USB 3.2 C 20 Gbps Feedthru Filter

HDMI Feedthru Filter

Key Features

  • 75 dB filter suppression at 5.8 and 7.125 GHz

  • Compatible with HDMI 1.4b

  • Manages 4K resolution (3840 x 2160)
  • Panel mountable

Specification

Connector Front HDMI Standard A
Connector Back HDMI Standard A
Material Aluminium
Dimensions 36x67x24 mm
Weight 90 g

Overview

The Ranatec RI 4193 is a high performance feedthru filter for all types of applications where HDMI signals need to be fed through a shielded wall. It has got very good filter suppression performance over all mobile frequency bands.

Application

Primarily designed to fit in Ranatec’s RI 180 series shield boxes, but can be used separately.

Electrical Interfaces

The physical connectors are located at each end. The filter is reciprocal, which means the mounting direction can be either way.

Mechanical Interfaces

RI 4193 is prepared for panel mounting with two threaded M3 screwholes on the front. It is delivered with an EMC shielding gasket for simple and reliable mounting.

Ordering

  • RI 4193 HDMI Feedthru Filter

Optical Fiber Feedthru

Key Features

  • 120 dB suppression at 100 MHz – 15 GHz
  • 6 slots for fiber feedthru
  • Panel mountable

Specification

Suppression at 100 MHz-15 GHz 120 dB
Standards MIL-STD-285 & 461
Material Steel
Dimensions 56×45 mm

Overview

The Ranatec RI 4196 is a high performance optical fiber feedthru element for all types of applications.

Application

  • RF Shielded boxes
  • Anechoic chamber
  • MRI
RI 4196 Optical Fiber Feedthru | Ranatec

Mechanical Interfaces

RI 4196 is prepared for panel mounting in a 30 mm hole. It is has a simple and reliable mounting.

Electrical Interfaces

No electrical interfaces.

Ordering

  • RI 4196 Optical Fiber Feedthru Element

Ask for a Quote